loading
XT-H2060
XTOUKE
Availability: | |
---|---|
Model | OPT-H1530 | OPT-H1545 | OPT-H1560 | OPT-H2040 | OPT-H2060 |
Laser Power | ≤4000W | ||||
Working Area | 1500*3000 | 1500*4500 | 1500*6000 | 2000*4000 | 2000*6000 |
Idling Speed | 80m/min | ||||
Cutting Speed | 50m/min | ||||
Max.Acceleration | 0.8G |
1.Cutting ability is greatly improved
2.Improved cutting efficiency
3.Bright surface cutting efficiency is improved
1.The bed is made of high-strength carbon structural steel and the anti-burning design of the graphite plate ensures that the bed is not affected by high temperature.
2.The beam is split, easy to disassemble and transport, artificial aging and solution treatment
3.Rear bed thick plate welding, split assembly structure Convenient transportation and processing, eccentric wheel lift structure, improve cutting stability
4.Original laser imported from Germany, built-in double water cooling, good heat dissipation,THK guide rail with high precision and low noise
Model | OPT-H1530 | OPT-H1545 | OPT-H1560 | OPT-H2040 | OPT-H2060 |
Laser Power | ≤4000W | ||||
Working Area | 1500*3000 | 1500*4500 | 1500*6000 | 2000*4000 | 2000*6000 |
Idling Speed | 80m/min | ||||
Cutting Speed | 50m/min | ||||
Max.Acceleration | 0.8G |
1.Cutting ability is greatly improved
2.Improved cutting efficiency
3.Bright surface cutting efficiency is improved
1.The bed is made of high-strength carbon structural steel and the anti-burning design of the graphite plate ensures that the bed is not affected by high temperature.
2.The beam is split, easy to disassemble and transport, artificial aging and solution treatment
3.Rear bed thick plate welding, split assembly structure Convenient transportation and processing, eccentric wheel lift structure, improve cutting stability
4.Original laser imported from Germany, built-in double water cooling, good heat dissipation,THK guide rail with high precision and low noise
Cutting capacity of 1000w laser cutting machine | |||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||
1000w | 8-10 | 4-6.5 | 2.4-3 | 2-2.4 | 1.5-2.0 | 1.4-1.6 | 0.8-1.2 | 0.6-1.0 | |
Stainless SteelN2) | |||||||||
18-25 | 5.0-7.5 | 1.8-2.5 | 1.2-1.3 | ||||||
Aluminium(N2) | |||||||||
6.0-10 | 2.8-3.6 | ||||||||
Brass (N2) | |||||||||
6.0-10 | 2.8-3.6 |
Consumables cost of 1000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
1000w | Power consumption | Laser generator /(kW/h) | 3 | 3 | 3 | 3 |
Chiller/(kW/h) | 3.5 | 3.5 | 3.5 | 3.5 | ||
Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 15.5 | 15.5 | 15.5 | 15.5 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 9.3 | 9.3 | 9.3 | 9.3 | ||
Consumable parts/(USD/h) | $0.27 | $0.27 | $0.27 | $0.27 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $2.29 | $2.83 | $11.92 | $4.30 |
Cutting capacity of 1500w laser cutting machine | ||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||
1500w | 8-26 | 4.5-6.5 | 2.6-4.0 | 2.5-3.0 | 2.0-2.5 | 1.6-2.2 | 1.0-1.4 | 0.8-1.1 | 0.7-1.0 | |
Stainless SteelN2) | ||||||||||
20-27 | 8.0-12 | 3-5 | 1.5-2.4 | 0.7-1.3 | ||||||
Aluminium(N2) | ||||||||||
10-20 | 5.0-7.0 | 2.0-4.0 | 1.0-1.5 | |||||||
Brass (N2) | ||||||||||
8.0-13 | 3.0-4.5 | 1.5-2.5 | 1.0-1.6 |
Consumables cost of 1500W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
1500w | Power consumption | Laser generator /(kW/h) | 4.5 | 4.5 | 4.5 | 4.5 |
Chiller/(kW/h) | 3.5 | 3.5 | 3.5 | 3.5 | ||
Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 17 | 17 | 17 | 17 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 10.2 | 10.2 | 10.2 | 10.2 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.27 | $0.27 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $2.43 | $2.97 | $12.06 | $4.44 |
Cutting capacity of 2000w laser cutting machine | |||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||
2000w | 24-30 | 4.7-6.5 | 3.0-4.8 | 2.8-3.5 | 2.2-3.0 | 1.8-2.6 | 1.2-1.8 | 1.1-1.3 | 0.9-1.2 | 0.7-0.8 | |
Stainless SteelN2) | |||||||||||
24-30 | 9-15 | 4.0-6.5 | 3.0-4.5 | 1.8-2.5 | 1.2-2.0 | ||||||
Aluminium(N2) | |||||||||||
15-25 | 7-10 | 4-6 | 2-3 | 1.2-1.8 | 0.7-1.0 | ||||||
Brass (N2) | |||||||||||
10-16 | 4.5-7.5 | 2.5-4.0 | 1.5-2.0 | 0.9-1.2 |
Consumables cost of 2000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
2000w | Power consumption | Laser generator /(kW/h) | 6 | 6 | 6 | 6 |
Chiller/(kW/h) | 5.7 | 5.7 | 5.7 | 5.7 | ||
Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 20.7 | 20.7 | 20.7 | 20.7 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 12.42 | 12.42 | 12.42 | 12.42 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $2.78 | $3.32 | $12.38 | $4.76 |
Cutting capacity of 3000w laser cutting machine | ||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||
3000w | 30-40 | 4.8-7.5 | 3.3-5.0 | 3.0-4.2 | 2.6-3.5 | 2.2-3.2 | 1.8-2.6 | 1.2-2.0 | 1.0-1.6 | 0.9-1.4 | 0.7-1.0 | |
Stainless SteelN2) | ||||||||||||
30-35 | 13-21 | 6-10 | 4-6 | 3-5 | 2-4 | 1.5-2.0 | 0.6-0.8 | |||||
Aluminium(N2) | ||||||||||||
25-38 | 10-18 | 6.5-8.0 | 3.5-5.0 | 2.5-3.5 | 1.5-2.5 | 0.7-1.0 | 0.4-0.7 | |||||
Brass (N2) | ||||||||||||
20-35 | 6-10 | 4-6 | 3-5 | 1.5-2.0 | 1.0-1.8 |
Cutting capacity of 4000w laser cutting machine | ||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||
4000w | 33-43 | 15-25 | 7-12 | 3-4 | 2.7-3.6 | 2.5-3.4 | 2.0-3.0 | 1.5-2.4 | 1.2-1.8 | 0.9-1.2 | 0.8-1.0 | |
Stainless SteelN2) | ||||||||||||
32-45 | 16-28 | 7-15 | 5-8 | 3.5-5.0 | 2.5-4.5 | 1.2-2.0 | 0.8-1.2 | 0.5-0.8 | ||||
Aluminium(N2) | ||||||||||||
35-45 | 13-24 | 7-13 | 4.0-5.5 | 3.0-4.5 | 2.0-3.5 | 0.9-1.6 | 0.6-1.2 | 0.4-0.6 | 0.3-0.5 | |||
Brass (N2) | ||||||||||||
25-35 | 8-12 | 5-8 | 3.2-5.5 | 2.0-3.0 | 1.4-2.0 | 0.7-1.2 |
Consumables cost of 4000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
4000w | Power consumption | Laser generator /(kW/h) | 12 | 12 | 12 | 12 |
Chiller/(kW/h) | 6 | 6 | 6 | 6 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 31 | 31 | 31 | 31 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 18.6 | 18.6 | 18.6 | 18.6 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $3.76 | $4.29 | $13.40 | $5.46 |
Cutting capacity of 6000w laser cutting machine | ||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||||
6000w | 35-44 | 20-28 | 13-17 | 3.0-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-3.2 | 1.8-2.5 | 1.2-2.0 | 1.2-1.8 | 0.8-1.3 | 0.5-0.8 | 0.3-0.55 | |
Stainless SteelN2) | ||||||||||||||
42-52 | 20-33 | 15-22 | 10-15 | 8-12 | 4.8-8.0 | 3.0-4.0 | 1.6-2.5 | 0.8-1.5 | 0.6-0.8 | 0.4-0.5 | 0.3-0.5 | |||
Aluminium(N2) | ||||||||||||||
42-52 | 20-40 | 15-25 | 9.5-12 | 5-8 | 3.8-5.0 | 2.0-2.5 | 1.0-1.5 | 0.8-1.0 | 0.7-0.9 | 0.5-0.8 | 0.5-0.7 | |||
Brass (N2) | ||||||||||||||
35-45 | 20-30 | 12-18 | 5-8 | 4.5-6.0 | 3.0-4.5 | 1.6-2.2 | 0.8-1.2 | 0.3-0.5 |
Cutting capacity of 8000w laser cutting machine | ||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||||
8000w | 40-50 | 28-35 | 15-19 | 3.0-4.5 | 3.0-4.2 | 2.6-3.7 | 2.3-2.5 | 2.0-2.7 | 1.5-2.1 | 1.2-1.9 | 0.8-1.5 | 0.6-0.9 | 0.3-0.7 | |
Stainless SteelN2) | ||||||||||||||
50-65 | 30-40 | 18-27 | 12-16 | 10-15 | 6-10 | 3.5-5.0 | 2.0-2.7 | 1.2-2.0 | 1.2-1.8 | 1.0-1.6 | 0.4-0.7 | 0.3-0.5 | ||
Aluminium(N2) | ||||||||||||||
48-65 | 25-48 | 20-33 | 13-18 | 9-12 | 4.5-8.0 | 4.0-5.5 | 2.2-3.0 | 1.5-1.8 | 1.2-1.6 | 1.0-1.6 | 0.7-1.0 | |||
Brass (N2) | ||||||||||||||
40-55 | 28-40 | 20-30 | 10-15 | 6-9 | 4.5-6.5 | 2.4-4.0 | 1.5-2.2 | 0.6-0.8 |
Consumables cost of 8000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
8000w | Power consumption | Laser generator /(kW/h) | 24 | 24 | 24 | 24 |
Chiller/(kW/h) | 10 | 10 | 10 | 10 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 47 | 47 | 47 | 47 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 28.2 | 28.2 | 28.2 | 28.2 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $5.29 | $5.83 | $14.92 | $7.30 |
Cutting capacity of 10000w laser cutting machine | |||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
10000w | 42-52 | 28-35 | 16-25 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
Stainless SteelN2) | |||||||||||||||
60-75 | 40-55 | 27-38 | 18-25 | 15-22 | 12-15 | 8-12 | 6-8 | 3-5 | 1.8-3.0 | 1.6-2.5 | 1.2-1.8 | 0.6-0.7 | 0.5-0.6 | ||
Aluminium(N2) | |||||||||||||||
60-75 | 33-45 | 25-35 | 21-30 | 13-20 | 9-12 | 4.5-8.0 | 4.0-6.0 | 2.2-3.0 | 1.8-2.5 | 1.5-2.0 | 1.0-1.6 | 0.7-1.0 | |||
Brass (N2) | |||||||||||||||
65-75 | 33-45 | 25-40 | 15-24 | 9-15 | 7-9 | 4.5-6.5 | 2.4-4.0 | 1.5-2.2 | 0.6-0.8 |
Consumables cost of 10000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
10000w | Power consumption | Laser generator /(kW/h) | 30 | 30 | 30 | 30 |
Chiller/(kW/h) | 10 | 10 | 10 | 10 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 53 | 53 | 53 | 53 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 31.8 | 31.8 | 31.8 | 31.8 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $5.86 | $6.35 | $15.49 | $7.78 |
Cutting capacity of 12000w laser cutting machine | |||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
12000w | 45-55 | 28-40 | 18-30 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
Stainless SteelN2) | |||||||||||||||
70-85 | 50-66 | 33-45 | 22-32 | 18-25 | 15-22 | 10-16 | 8-12 | 6-8 | 3-5 | 2-4 | 1.8-3.0 | 1.2-1.8 | 0.6-0.7 | ||
Aluminium(N2) | |||||||||||||||
70-85 | 38-50 | 30-40 | 25-38 | 15-25 | 13-18 | 9-12 | 4.5-8.0 | 4.0-6.0 | 4.5-5.0 | 2.0-3.0 | 1.5-2.0 | 1.0-1.6 | 0.7-1.0 | ||
Brass (N2) | |||||||||||||||
75-85 | 38-50 | 30-50 | 25-33 | 15-24 | 9-15 | 7-9 | 4.5-6.5 | 2.5-4.0 | 0.8-1.5 | 0.6-0.8 |
<table width="100%" style="table-layout: fixed;>
Consumables cost of 12000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
12000w | Power consumption | Laser generator /(kW/h) | 36 | 36 | 36 | 36 |
Chiller/(kW/h) | 12 | 12 | 12 | 12 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 61 | 61 | 61 | 61 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 36.6 | 36.6 | 36.6 | 36.6 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $6.62 | $7.16 | $16.25 | $8.63 |
Cutting capacity of 15000w laser cutting machine | |||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
15000w | 48-60 | 20-42 | 20-30 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
Stainless SteelN2) | |||||||||||||||
72-85 | 52-70 | 38-50 | 25-35 | 20-30 | 18-25 | 12-18 | 10-15 | 8-10 | 3.0-6.0 | 3.0-4.5 | 2.0-3.5 | 1.5-2.0 | 0.8-1.0 | ||
Aluminium(N2) | |||||||||||||||
70-85 | 40-55 | 35-45 | 30-40 | 20-30 | 15-24 | 11-15 | 6-10 | 5-8 | 4.5-5.0 | 2.8-3.5 | 2.0-2.5 | 1.2-2.0 | 0.8-1.0 | ||
Brass (N2) | |||||||||||||||
75-85 | 40-55 | 32-50 | 27-35 | 18-26 | 10-28 | 8-10 | 5-7 | 2.8-4.2 | 1.0-1.8 | 0.8-1.5 | 0.4-0.6 |
Consumables cost of 15000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
15000w | Power consumption | Laser generator /(kW/h) | 45 | 45 | 45 | 45 |
Chiller/(kW/h) | 15 | 15 | 15 | 15 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 73 | 73 | 73 | 73 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 43.8 | 43.8 | 43.8 | 43.8 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $7.76 | $8.30 | $17.40 | $9.78 |
Cutting capacity of 1000w laser cutting machine | |||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||
1000w | 8-10 | 4-6.5 | 2.4-3 | 2-2.4 | 1.5-2.0 | 1.4-1.6 | 0.8-1.2 | 0.6-1.0 | |
Stainless SteelN2) | |||||||||
18-25 | 5.0-7.5 | 1.8-2.5 | 1.2-1.3 | ||||||
Aluminium(N2) | |||||||||
6.0-10 | 2.8-3.6 | ||||||||
Brass (N2) | |||||||||
6.0-10 | 2.8-3.6 |
Consumables cost of 1000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
1000w | Power consumption | Laser generator /(kW/h) | 3 | 3 | 3 | 3 |
Chiller/(kW/h) | 3.5 | 3.5 | 3.5 | 3.5 | ||
Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 15.5 | 15.5 | 15.5 | 15.5 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 9.3 | 9.3 | 9.3 | 9.3 | ||
Consumable parts/(USD/h) | $0.27 | $0.27 | $0.27 | $0.27 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $2.29 | $2.83 | $11.92 | $4.30 |
Cutting capacity of 1500w laser cutting machine | ||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||
1500w | 8-26 | 4.5-6.5 | 2.6-4.0 | 2.5-3.0 | 2.0-2.5 | 1.6-2.2 | 1.0-1.4 | 0.8-1.1 | 0.7-1.0 | |
Stainless SteelN2) | ||||||||||
20-27 | 8.0-12 | 3-5 | 1.5-2.4 | 0.7-1.3 | ||||||
Aluminium(N2) | ||||||||||
10-20 | 5.0-7.0 | 2.0-4.0 | 1.0-1.5 | |||||||
Brass (N2) | ||||||||||
8.0-13 | 3.0-4.5 | 1.5-2.5 | 1.0-1.6 |
Consumables cost of 1500W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
1500w | Power consumption | Laser generator /(kW/h) | 4.5 | 4.5 | 4.5 | 4.5 |
Chiller/(kW/h) | 3.5 | 3.5 | 3.5 | 3.5 | ||
Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 17 | 17 | 17 | 17 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 10.2 | 10.2 | 10.2 | 10.2 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.27 | $0.27 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $2.43 | $2.97 | $12.06 | $4.44 |
Cutting capacity of 2000w laser cutting machine | |||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||
2000w | 24-30 | 4.7-6.5 | 3.0-4.8 | 2.8-3.5 | 2.2-3.0 | 1.8-2.6 | 1.2-1.8 | 1.1-1.3 | 0.9-1.2 | 0.7-0.8 | |
Stainless SteelN2) | |||||||||||
24-30 | 9-15 | 4.0-6.5 | 3.0-4.5 | 1.8-2.5 | 1.2-2.0 | ||||||
Aluminium(N2) | |||||||||||
15-25 | 7-10 | 4-6 | 2-3 | 1.2-1.8 | 0.7-1.0 | ||||||
Brass (N2) | |||||||||||
10-16 | 4.5-7.5 | 2.5-4.0 | 1.5-2.0 | 0.9-1.2 |
Consumables cost of 2000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
2000w | Power consumption | Laser generator /(kW/h) | 6 | 6 | 6 | 6 |
Chiller/(kW/h) | 5.7 | 5.7 | 5.7 | 5.7 | ||
Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 20.7 | 20.7 | 20.7 | 20.7 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 12.42 | 12.42 | 12.42 | 12.42 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $2.78 | $3.32 | $12.38 | $4.76 |
Cutting capacity of 3000w laser cutting machine | ||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||
3000w | 30-40 | 4.8-7.5 | 3.3-5.0 | 3.0-4.2 | 2.6-3.5 | 2.2-3.2 | 1.8-2.6 | 1.2-2.0 | 1.0-1.6 | 0.9-1.4 | 0.7-1.0 | |
Stainless SteelN2) | ||||||||||||
30-35 | 13-21 | 6-10 | 4-6 | 3-5 | 2-4 | 1.5-2.0 | 0.6-0.8 | |||||
Aluminium(N2) | ||||||||||||
25-38 | 10-18 | 6.5-8.0 | 3.5-5.0 | 2.5-3.5 | 1.5-2.5 | 0.7-1.0 | 0.4-0.7 | |||||
Brass (N2) | ||||||||||||
20-35 | 6-10 | 4-6 | 3-5 | 1.5-2.0 | 1.0-1.8 |
Cutting capacity of 4000w laser cutting machine | ||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||
4000w | 33-43 | 15-25 | 7-12 | 3-4 | 2.7-3.6 | 2.5-3.4 | 2.0-3.0 | 1.5-2.4 | 1.2-1.8 | 0.9-1.2 | 0.8-1.0 | |
Stainless SteelN2) | ||||||||||||
32-45 | 16-28 | 7-15 | 5-8 | 3.5-5.0 | 2.5-4.5 | 1.2-2.0 | 0.8-1.2 | 0.5-0.8 | ||||
Aluminium(N2) | ||||||||||||
35-45 | 13-24 | 7-13 | 4.0-5.5 | 3.0-4.5 | 2.0-3.5 | 0.9-1.6 | 0.6-1.2 | 0.4-0.6 | 0.3-0.5 | |||
Brass (N2) | ||||||||||||
25-35 | 8-12 | 5-8 | 3.2-5.5 | 2.0-3.0 | 1.4-2.0 | 0.7-1.2 |
Consumables cost of 4000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
4000w | Power consumption | Laser generator /(kW/h) | 12 | 12 | 12 | 12 |
Chiller/(kW/h) | 6 | 6 | 6 | 6 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 31 | 31 | 31 | 31 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 18.6 | 18.6 | 18.6 | 18.6 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $3.76 | $4.29 | $13.40 | $5.46 |
Cutting capacity of 6000w laser cutting machine | ||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||||
6000w | 35-44 | 20-28 | 13-17 | 3.0-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-3.2 | 1.8-2.5 | 1.2-2.0 | 1.2-1.8 | 0.8-1.3 | 0.5-0.8 | 0.3-0.55 | |
Stainless SteelN2) | ||||||||||||||
42-52 | 20-33 | 15-22 | 10-15 | 8-12 | 4.8-8.0 | 3.0-4.0 | 1.6-2.5 | 0.8-1.5 | 0.6-0.8 | 0.4-0.5 | 0.3-0.5 | |||
Aluminium(N2) | ||||||||||||||
42-52 | 20-40 | 15-25 | 9.5-12 | 5-8 | 3.8-5.0 | 2.0-2.5 | 1.0-1.5 | 0.8-1.0 | 0.7-0.9 | 0.5-0.8 | 0.5-0.7 | |||
Brass (N2) | ||||||||||||||
35-45 | 20-30 | 12-18 | 5-8 | 4.5-6.0 | 3.0-4.5 | 1.6-2.2 | 0.8-1.2 | 0.3-0.5 |
Cutting capacity of 8000w laser cutting machine | ||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||||
8000w | 40-50 | 28-35 | 15-19 | 3.0-4.5 | 3.0-4.2 | 2.6-3.7 | 2.3-2.5 | 2.0-2.7 | 1.5-2.1 | 1.2-1.9 | 0.8-1.5 | 0.6-0.9 | 0.3-0.7 | |
Stainless SteelN2) | ||||||||||||||
50-65 | 30-40 | 18-27 | 12-16 | 10-15 | 6-10 | 3.5-5.0 | 2.0-2.7 | 1.2-2.0 | 1.2-1.8 | 1.0-1.6 | 0.4-0.7 | 0.3-0.5 | ||
Aluminium(N2) | ||||||||||||||
48-65 | 25-48 | 20-33 | 13-18 | 9-12 | 4.5-8.0 | 4.0-5.5 | 2.2-3.0 | 1.5-1.8 | 1.2-1.6 | 1.0-1.6 | 0.7-1.0 | |||
Brass (N2) | ||||||||||||||
40-55 | 28-40 | 20-30 | 10-15 | 6-9 | 4.5-6.5 | 2.4-4.0 | 1.5-2.2 | 0.6-0.8 |
Consumables cost of 8000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
8000w | Power consumption | Laser generator /(kW/h) | 24 | 24 | 24 | 24 |
Chiller/(kW/h) | 10 | 10 | 10 | 10 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 47 | 47 | 47 | 47 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 28.2 | 28.2 | 28.2 | 28.2 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $5.29 | $5.83 | $14.92 | $7.30 |
Cutting capacity of 10000w laser cutting machine | |||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
10000w | 42-52 | 28-35 | 16-25 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
Stainless SteelN2) | |||||||||||||||
60-75 | 40-55 | 27-38 | 18-25 | 15-22 | 12-15 | 8-12 | 6-8 | 3-5 | 1.8-3.0 | 1.6-2.5 | 1.2-1.8 | 0.6-0.7 | 0.5-0.6 | ||
Aluminium(N2) | |||||||||||||||
60-75 | 33-45 | 25-35 | 21-30 | 13-20 | 9-12 | 4.5-8.0 | 4.0-6.0 | 2.2-3.0 | 1.8-2.5 | 1.5-2.0 | 1.0-1.6 | 0.7-1.0 | |||
Brass (N2) | |||||||||||||||
65-75 | 33-45 | 25-40 | 15-24 | 9-15 | 7-9 | 4.5-6.5 | 2.4-4.0 | 1.5-2.2 | 0.6-0.8 |
Consumables cost of 10000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
10000w | Power consumption | Laser generator /(kW/h) | 30 | 30 | 30 | 30 |
Chiller/(kW/h) | 10 | 10 | 10 | 10 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 53 | 53 | 53 | 53 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 31.8 | 31.8 | 31.8 | 31.8 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $5.86 | $6.35 | $15.49 | $7.78 |
Cutting capacity of 12000w laser cutting machine | |||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
12000w | 45-55 | 28-40 | 18-30 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
Stainless SteelN2) | |||||||||||||||
70-85 | 50-66 | 33-45 | 22-32 | 18-25 | 15-22 | 10-16 | 8-12 | 6-8 | 3-5 | 2-4 | 1.8-3.0 | 1.2-1.8 | 0.6-0.7 | ||
Aluminium(N2) | |||||||||||||||
70-85 | 38-50 | 30-40 | 25-38 | 15-25 | 13-18 | 9-12 | 4.5-8.0 | 4.0-6.0 | 4.5-5.0 | 2.0-3.0 | 1.5-2.0 | 1.0-1.6 | 0.7-1.0 | ||
Brass (N2) | |||||||||||||||
75-85 | 38-50 | 30-50 | 25-33 | 15-24 | 9-15 | 7-9 | 4.5-6.5 | 2.5-4.0 | 0.8-1.5 | 0.6-0.8 |
<table width="100%" style="table-layout: fixed;>
Consumables cost of 12000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
12000w | Power consumption | Laser generator /(kW/h) | 36 | 36 | 36 | 36 |
Chiller/(kW/h) | 12 | 12 | 12 | 12 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 61 | 61 | 61 | 61 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 36.6 | 36.6 | 36.6 | 36.6 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $6.62 | $7.16 | $16.25 | $8.63 |
Cutting capacity of 15000w laser cutting machine | |||||||||||||||
1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
15000w | 48-60 | 20-42 | 20-30 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
Stainless SteelN2) | |||||||||||||||
72-85 | 52-70 | 38-50 | 25-35 | 20-30 | 18-25 | 12-18 | 10-15 | 8-10 | 3.0-6.0 | 3.0-4.5 | 2.0-3.5 | 1.5-2.0 | 0.8-1.0 | ||
Aluminium(N2) | |||||||||||||||
70-85 | 40-55 | 35-45 | 30-40 | 20-30 | 15-24 | 11-15 | 6-10 | 5-8 | 4.5-5.0 | 2.8-3.5 | 2.0-2.5 | 1.2-2.0 | 0.8-1.0 | ||
Brass (N2) | |||||||||||||||
75-85 | 40-55 | 32-50 | 27-35 | 18-26 | 10-28 | 8-10 | 5-7 | 2.8-4.2 | 1.0-1.8 | 0.8-1.5 | 0.4-0.6 |
Consumables cost of 15000W laser cutting machine | ||||||
Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
15000w | Power consumption | Laser generator /(kW/h) | 45 | 45 | 45 | 45 |
Chiller/(kW/h) | 15 | 15 | 15 | 15 | ||
Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
Total power/(kW/h) | 73 | 73 | 73 | 73 | ||
Average power/(kW/h) (e.g.cutting efficiency 60%) | 43.8 | 43.8 | 43.8 | 43.8 | ||
Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
Total operation cost/(USD/h)(RMB1=1kW/h) | $7.76 | $8.30 | $17.40 | $9.78 |
content is empty!