Tube Laser Cutting Machine T Series
Product Description
| Machine Type | OPT-T160 | OPT-T220 | OPT-T230 | OPT-T350 |
| Laser Power | ≤2000W | ≤2000W | ≤3000W | ≤3000W |
| Cutting Length | 3M/6M | 3M/6M | 6M/9.2M | 6M/9.2M |
| Clamping Range | Ø10- Ø350 | |||
| Re-positioning Accuracy | ±0.03mm | |||
| Axial Positioning Accuracy | ±0.05mm/m | |||
1.Applicable for metal pipe,square pipe,rectangular pipe,deformed pipe ect ,with fast speed and high quality
2.Smaller cutting gap,low deformation,more smooth、flat and beautiful cutting edge,and without secondly process.High-accuracy cutting to cut down consumption effectively
3.Automatically moistening guide rail,both pneumatically back and forward chucks,quickly responding in the corner to improving cutting efficiency tremendously
4. Tube laser cutting machine adopts an electric clamp design on both sides and it can modulate the center automatically
1.Stability and reliability of light path system and control system.
2.Imported original fiber lasers,high and stable function,lifespan is over 100000 hours.
3.Higher cutting quality and efficiency ,cutting speed is up to 80m/min with appearance and beautiful cutting edge.
4.German high performance reducer,gear and rack;Japanese guide and all screw.
Cutting capacity and Operating cost
| Cutting capacity of 1000w laser cutting machine | |||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | |||||||
| 1000w | 8-10 | 4-6.5 | 2.4-3 | 2-2.4 | 1.5-2.0 | 1.4-1.6 | 0.8-1.2 | 0.6-1.0 | |
| Stainless SteelN2) | |||||||||
| 18-25 | 5.0-7.5 | 1.8-2.5 | 1.2-1.3 | ||||||
| Aluminium(N2) | |||||||||
| 6.0-10 | 2.8-3.6 | ||||||||
| Brass (N2) | |||||||||
| 6.0-10 | 2.8-3.6 | ||||||||
| Consumables cost of 1000W laser cutting machine | ||||||
| Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
| 1000w | Power consumption | Laser generator /(kW/h) | 3 | 3 | 3 | 3 |
| Chiller/(kW/h) | 3.5 | 3.5 | 3.5 | 3.5 | ||
| Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
| Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
| Total power/(kW/h) | 15.5 | 15.5 | 15.5 | 15.5 | ||
| Average power/(kW/h) (e.g.cutting efficiency 60%) | 9.3 | 9.3 | 9.3 | 9.3 | ||
| Consumable parts/(USD/h) | $0.27 | $0.27 | $0.27 | $0.27 | ||
| Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
| Total operation cost/(USD/h)(RMB1=1kW/h) | $2.29 | $2.83 | $11.92 | $4.30 | ||
| Cutting capacity of 1500w laser cutting machine | ||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||
| 1500w | 8-26 | 4.5-6.5 | 2.6-4.0 | 2.5-3.0 | 2.0-2.5 | 1.6-2.2 | 1.0-1.4 | 0.8-1.1 | 0.7-1.0 | |
| Stainless SteelN2) | ||||||||||
| 20-27 | 8.0-12 | 3-5 | 1.5-2.4 | 0.7-1.3 | ||||||
| Aluminium(N2) | ||||||||||
| 10-20 | 5.0-7.0 | 2.0-4.0 | 1.0-1.5 | |||||||
| Brass (N2) | ||||||||||
| 8.0-13 | 3.0-4.5 | 1.5-2.5 | 1.0-1.6 | |||||||
| Consumables cost of 1500W laser cutting machine | ||||||
| Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
| 1500w | Power consumption | Laser generator /(kW/h) | 4.5 | 4.5 | 4.5 | 4.5 |
| Chiller/(kW/h) | 3.5 | 3.5 | 3.5 | 3.5 | ||
| Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
| Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
| Total power/(kW/h) | 17 | 17 | 17 | 17 | ||
| Average power/(kW/h) (e.g.cutting efficiency 60%) | 10.2 | 10.2 | 10.2 | 10.2 | ||
| Consumable parts/(USD/h) | $0.29 | $0.29 | $0.27 | $0.27 | ||
| Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
| Total operation cost/(USD/h)(RMB1=1kW/h) | $2.43 | $2.97 | $12.06 | $4.44 | ||
| Cutting capacity of 2000w laser cutting machine | |||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||
| 2000w | 24-30 | 4.7-6.5 | 3.0-4.8 | 2.8-3.5 | 2.2-3.0 | 1.8-2.6 | 1.2-1.8 | 1.1-1.3 | 0.9-1.2 | 0.7-0.8 | |
| Stainless SteelN2) | |||||||||||
| 24-30 | 9-15 | 4.0-6.5 | 3.0-4.5 | 1.8-2.5 | 1.2-2.0 | ||||||
| Aluminium(N2) | |||||||||||
| 15-25 | 7-10 | 4-6 | 2-3 | 1.2-1.8 | 0.7-1.0 | ||||||
| Brass (N2) | |||||||||||
| 10-16 | 4.5-7.5 | 2.5-4.0 | 1.5-2.0 | 0.9-1.2 | |||||||
| Consumables cost of 2000W laser cutting machine | ||||||
| Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
| 2000w | Power consumption | Laser generator /(kW/h) | 6 | 6 | 6 | 6 |
| Chiller/(kW/h) | 5.7 | 5.7 | 5.7 | 5.7 | ||
| Host machine/(kW/h) | 6 | 6 | 6 | 6 | ||
| Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
| Total power/(kW/h) | 20.7 | 20.7 | 20.7 | 20.7 | ||
| Average power/(kW/h) (e.g.cutting efficiency 60%) | 12.42 | 12.42 | 12.42 | 12.42 | ||
| Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
| Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
| Total operation cost/(USD/h)(RMB1=1kW/h) | $2.78 | $3.32 | $12.38 | $4.76 | ||
| Cutting capacity of 3000w laser cutting machine | ||||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||
| 3000w | 30-40 | 4.8-7.5 | 3.3-5.0 | 3.0-4.2 | 2.6-3.5 | 2.2-3.2 | 1.8-2.6 | 1.2-2.0 | 1.0-1.6 | 0.9-1.4 | 0.7-1.0 | |
| Stainless SteelN2) | ||||||||||||
| 30-35 | 13-21 | 6-10 | 4-6 | 3-5 | 2-4 | 1.5-2.0 | 0.6-0.8 | |||||
| Aluminium(N2) | ||||||||||||
| 25-38 | 10-18 | 6.5-8.0 | 3.5-5.0 | 2.5-3.5 | 1.5-2.5 | 0.7-1.0 | 0.4-0.7 | |||||
| Brass (N2) | ||||||||||||
| 20-35 | 6-10 | 4-6 | 3-5 | 1.5-2.0 | 1.0-1.8 | |||||||
| Cutting capacity of 4000w laser cutting machine | ||||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||
| 4000w | 33-43 | 15-25 | 7-12 | 3-4 | 2.7-3.6 | 2.5-3.4 | 2.0-3.0 | 1.5-2.4 | 1.2-1.8 | 0.9-1.2 | 0.8-1.0 | |
| Stainless SteelN2) | ||||||||||||
| 32-45 | 16-28 | 7-15 | 5-8 | 3.5-5.0 | 2.5-4.5 | 1.2-2.0 | 0.8-1.2 | 0.5-0.8 | ||||
| Aluminium(N2) | ||||||||||||
| 35-45 | 13-24 | 7-13 | 4.0-5.5 | 3.0-4.5 | 2.0-3.5 | 0.9-1.6 | 0.6-1.2 | 0.4-0.6 | 0.3-0.5 | |||
| Brass (N2) | ||||||||||||
| 25-35 | 8-12 | 5-8 | 3.2-5.5 | 2.0-3.0 | 1.4-2.0 | 0.7-1.2 | ||||||
| Consumables cost of 4000W laser cutting machine | ||||||
| Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
| 4000w | Power consumption | Laser generator /(kW/h) | 12 | 12 | 12 | 12 |
| Chiller/(kW/h) | 6 | 6 | 6 | 6 | ||
| Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
| Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
| Total power/(kW/h) | 31 | 31 | 31 | 31 | ||
| Average power/(kW/h) (e.g.cutting efficiency 60%) | 18.6 | 18.6 | 18.6 | 18.6 | ||
| Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
| Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
| Total operation cost/(USD/h)(RMB1=1kW/h) | $3.76 | $4.29 | $13.40 | $5.46 | ||
| Cutting capacity of 6000w laser cutting machine | ||||||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||||
| 6000w | 35-44 | 20-28 | 13-17 | 3.0-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-3.2 | 1.8-2.5 | 1.2-2.0 | 1.2-1.8 | 0.8-1.3 | 0.5-0.8 | 0.3-0.55 | |
| Stainless SteelN2) | ||||||||||||||
| 42-52 | 20-33 | 15-22 | 10-15 | 8-12 | 4.8-8.0 | 3.0-4.0 | 1.6-2.5 | 0.8-1.5 | 0.6-0.8 | 0.4-0.5 | 0.3-0.5 | |||
| Aluminium(N2) | ||||||||||||||
| 42-52 | 20-40 | 15-25 | 9.5-12 | 5-8 | 3.8-5.0 | 2.0-2.5 | 1.0-1.5 | 0.8-1.0 | 0.7-0.9 | 0.5-0.8 | 0.5-0.7 | |||
| Brass (N2) | ||||||||||||||
| 35-45 | 20-30 | 12-18 | 5-8 | 4.5-6.0 | 3.0-4.5 | 1.6-2.2 | 0.8-1.2 | 0.3-0.5 | ||||||
| Cutting capacity of 8000w laser cutting machine | ||||||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | ||||||||||||
| 8000w | 40-50 | 28-35 | 15-19 | 3.0-4.5 | 3.0-4.2 | 2.6-3.7 | 2.3-2.5 | 2.0-2.7 | 1.5-2.1 | 1.2-1.9 | 0.8-1.5 | 0.6-0.9 | 0.3-0.7 | |
| Stainless SteelN2) | ||||||||||||||
| 50-65 | 30-40 | 18-27 | 12-16 | 10-15 | 6-10 | 3.5-5.0 | 2.0-2.7 | 1.2-2.0 | 1.2-1.8 | 1.0-1.6 | 0.4-0.7 | 0.3-0.5 | ||
| Aluminium(N2) | ||||||||||||||
| 48-65 | 25-48 | 20-33 | 13-18 | 9-12 | 4.5-8.0 | 4.0-5.5 | 2.2-3.0 | 1.5-1.8 | 1.2-1.6 | 1.0-1.6 | 0.7-1.0 | |||
| Brass (N2) | ||||||||||||||
| 40-55 | 28-40 | 20-30 | 10-15 | 6-9 | 4.5-6.5 | 2.4-4.0 | 1.5-2.2 | 0.6-0.8 | ||||||
| Consumables cost of 8000W laser cutting machine | ||||||
| Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
| 8000w | Power consumption | Laser generator /(kW/h) | 24 | 24 | 24 | 24 |
| Chiller/(kW/h) | 10 | 10 | 10 | 10 | ||
| Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
| Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
| Total power/(kW/h) | 47 | 47 | 47 | 47 | ||
| Average power/(kW/h) (e.g.cutting efficiency 60%) | 28.2 | 28.2 | 28.2 | 28.2 | ||
| Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
| Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
| Total operation cost/(USD/h)(RMB1=1kW/h) | $5.29 | $5.83 | $14.92 | $7.30 | ||
| Cutting capacity of 10000w laser cutting machine | |||||||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
| 10000w | 42-52 | 28-35 | 16-25 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
| Stainless SteelN2) | |||||||||||||||
| 60-75 | 40-55 | 27-38 | 18-25 | 15-22 | 12-15 | 8-12 | 6-8 | 3-5 | 1.8-3.0 | 1.6-2.5 | 1.2-1.8 | 0.6-0.7 | 0.5-0.6 | ||
| Aluminium(N2) | |||||||||||||||
| 60-75 | 33-45 | 25-35 | 21-30 | 13-20 | 9-12 | 4.5-8.0 | 4.0-6.0 | 2.2-3.0 | 1.8-2.5 | 1.5-2.0 | 1.0-1.6 | 0.7-1.0 | |||
| Brass (N2) | |||||||||||||||
| 65-75 | 33-45 | 25-40 | 15-24 | 9-15 | 7-9 | 4.5-6.5 | 2.4-4.0 | 1.5-2.2 | 0.6-0.8 | ||||||
| Consumables cost of 10000W laser cutting machine | ||||||
| Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
| 10000w | Power consumption | Laser generator /(kW/h) | 30 | 30 | 30 | 30 |
| Chiller/(kW/h) | 10 | 10 | 10 | 10 | ||
| Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
| Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
| Total power/(kW/h) | 53 | 53 | 53 | 53 | ||
| Average power/(kW/h) (e.g.cutting efficiency 60%) | 31.8 | 31.8 | 31.8 | 31.8 | ||
| Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
| Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
| Total operation cost/(USD/h)(RMB1=1kW/h) | $5.86 | $6.35 | $15.49 | $7.78 | ||
| Cutting capacity of 12000w laser cutting machine | |||||||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
| 12000w | 45-55 | 28-40 | 18-30 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
| Stainless SteelN2) | |||||||||||||||
| 70-85 | 50-66 | 33-45 | 22-32 | 18-25 | 15-22 | 10-16 | 8-12 | 6-8 | 3-5 | 2-4 | 1.8-3.0 | 1.2-1.8 | 0.6-0.7 | ||
| Aluminium(N2) | |||||||||||||||
| 70-85 | 38-50 | 30-40 | 25-38 | 15-25 | 13-18 | 9-12 | 4.5-8.0 | 4.0-6.0 | 4.5-5.0 | 2.0-3.0 | 1.5-2.0 | 1.0-1.6 | 0.7-1.0 | ||
| Brass (N2) | |||||||||||||||
| 75-85 | 38-50 | 30-50 | 25-33 | 15-24 | 9-15 | 7-9 | 4.5-6.5 | 2.5-4.0 | 0.8-1.5 | 0.6-0.8 | |||||
<table width="100%" style="table-layout: fixed;>
| Consumables cost of 12000W laser cutting machine | ||||||
| Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
| 12000w | Power consumption | Laser generator /(kW/h) | 36 | 36 | 36 | 36 |
| Chiller/(kW/h) | 12 | 12 | 12 | 12 | ||
| Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
| Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
| Total power/(kW/h) | 61 | 61 | 61 | 61 | ||
| Average power/(kW/h) (e.g.cutting efficiency 60%) | 36.6 | 36.6 | 36.6 | 36.6 | ||
| Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
| Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
| Total operation cost/(USD/h)(RMB1=1kW/h) | $6.62 | $7.16 | $16.25 | $8.63 | ||
| Cutting capacity of 15000w laser cutting machine | |||||||||||||||
| 1mm | 2mm | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 20mm | 25mm | 30mm | Material thickness | |
| Laser Power | Mild Steel (O2) | Speed:m/min | |||||||||||||
| 15000w | 48-60 | 20-42 | 20-30 | 3.5-5.5 | 3.3-4.5 | 3.0-4.2 | 2.5-3.5 | 2.2-2.7 | 1.7-1.9 | 1.2-2.1 | 0.9-1.7 | 0.6-0.9 | 0.3-0.7 | ||
| Stainless SteelN2) | |||||||||||||||
| 72-85 | 52-70 | 38-50 | 25-35 | 20-30 | 18-25 | 12-18 | 10-15 | 8-10 | 3.0-6.0 | 3.0-4.5 | 2.0-3.5 | 1.5-2.0 | 0.8-1.0 | ||
| Aluminium(N2) | |||||||||||||||
| 70-85 | 40-55 | 35-45 | 30-40 | 20-30 | 15-24 | 11-15 | 6-10 | 5-8 | 4.5-5.0 | 2.8-3.5 | 2.0-2.5 | 1.2-2.0 | 0.8-1.0 | ||
| Brass (N2) | |||||||||||||||
| 75-85 | 40-55 | 32-50 | 27-35 | 18-26 | 10-28 | 8-10 | 5-7 | 2.8-4.2 | 1.0-1.8 | 0.8-1.5 | 0.4-0.6 | ||||
| Consumables cost of 15000W laser cutting machine | ||||||
| Laser power | Consumption | Option 1: Using air compressor to cut S/S | Option 2: Using bottled O2 to cut S/S | Option 3: Using bottled N2 to cut S/S | Option 4: Using liquid N2 to cut S/S | |
| 15000w | Power consumption | Laser generator /(kW/h) | 45 | 45 | 45 | 45 |
| Chiller/(kW/h) | 15 | 15 | 15 | 15 | ||
| Host machine/(kW/h) | 10 | 10 | 10 | 10 | ||
| Dedusting equipment/(kW/h) | 3 | 3 | 3 | 3 | ||
| Total power/(kW/h) | 73 | 73 | 73 | 73 | ||
| Average power/(kW/h) (e.g.cutting efficiency 60%) | 43.8 | 43.8 | 43.8 | 43.8 | ||
| Consumable parts/(USD/h) | $0.29 | $0.29 | $0.29 | $0.29 | ||
| Gas consumption/(USD/h) | $0.52 | $1.06 | $10.16 | $2.54 | ||
| Total operation cost/(USD/h)(RMB1=1kW/h) | $7.76 | $8.30 | $17.40 | $9.78 | ||